|
|
Tate Engineering Systems offers a full line of
Falls Filtration / Airmaze products including:
|
 |
 |
Air/Oil Separators
Developed to separate and agglomerate oil mist from rotary screw air compressors. The two-stage process rated at 99.96% on .3 micron particles with minimum carryover. Designed to withstand 50 PSI differential and flow ranges from 20-3000 CFM compressor applications. Grounding to prevent static electricity build-up is standard. Options include special flanges, gaskets, kits and pleated media designs. Over 300 models available. |
|
 |
MicroMaze® Compressed Gas Filters
- Particulate and coalescing filters for compressed gases
- With UltraMaze™ media for optimum performance
- Flows up to 1660 SCFM
|
|
 |
Exhaust Smoke Eliminators
Closed circuit or open type models, specifically engineered to eliminate oil mist found in discharge gases of rotary or reciprocating vacuum pumps. Fifteen models available up to 1200 CFM. |
|
 |
Panel House Filter Assemblies
Popular DH type panel assemblies available in many sizes and shapes for capacities ranging from 2000 to 60,000 CFM. Designed for direct or remote mounting, indoors or outdoors. Hinged louvered doors. Features include optional choice of panel filter medias, silencing features, and top or bottom outlets. |
|
 |
Electronic Cabinet Air Filters
Designed to accommodate high velocities involved in forced air cooling of electronic equipment. Available both with dry or oil-wetted medias in any circular, square or rectangular size. Channel thicknesses from 1/4" to 1". Also available with RF shielding properties. |
|
 |
Permanent Air Filter Panels
Developed for engine, compressor or bulk air handling systems, the Kleenflo and P5 oil-wetted filters and P61 and P116 dry types are available in all sizes and thicknesses to 4 inches, with a range of face velocities and efficiencies per standard AFI tests. Holding frames to match. |
|
|
Panel Air Filters
Dry type pleated paper media provides high efficiency and long service life in mobile ventilating systems and induction air applications. Lightweight, easy to clean and cost effective. Over 200 model sizes available. |
|
 |
Aircraft Filters
Air intake filters designed for light aircraft and helicopters, engine fuel and lube oil filters and replacement cartridges. Models include in-line or T-type with a variety of medias. FAA/PMA approved and tested to MIL specifications. |
|
 |
Dry Type MDA Filters
Heavy duty dry type air filters with synthetic media elements and disposable pre-filters for extended service life available in capacity ranges from 20 to 6650 CFM. Filter silencer models also. Optional dry type paper elements and weatherhoods are also available. |
|
| |
Heavy Duty Air Cleaners
Two-stage inertial type air filters employ cyclonic action plus dry type media to provide 99.9% air cleaning efficiency. Sizes range from 115 to 2000 CFM. Optional secondary elements. Mounting brackets, weathercaps and pressure indicators also available. |
|
 |
Unimaze® and Multimaze® Filters
Single stage, low-cost viscous impingement air filters, designed for direct engine intake. The multi-layered crimped wire screen provides over 90% efficiency and low pressure drop. Optional dry paper and synthetic media elements and weatherhoods available. Sizes range from 20 to 450 CFM. |
|
 |
Oil Bath/Oil Wetted Filters
Heavy duty air filter and filter-silencer models for air compressor and engine intakes feature combination of oil scrubbing action and viscous impingement principle. Good dirt holding capacity, little maintenance, long service life. Available with and without relief valves up to 6000 CFM rated air flows. |
|
 |
Breather Filters
Wide variety of standard models and sizes, both oil-wetted and dry medias, designed to prevent dirt from entering tanks, crankcases, transmissions or vented housings and reduce oil blow out. Pipe connections from 1/8" to 2" NPT. Flows to 80 CFM. |
|
 |
Liquid Filters
Available for small or large capacities, high or low pressure applications with optional relief valves, pressure indicators. Simplex models for full flow filtration and low pressure drop and Duplex models for continuous filtering operation for hydraulic, fuel and lube oil applications. Special designs upon request. |
|
 |
Replacement Elements
Dry type filter elements featuring deep pleated construction for longer service interval, easier cleaning, and fine filtration. Rugged construction, metal and plastisol end caps in all sizes to 600 CFM. Available for replacement on off-highway and earth-moving equipment. |
|
 |
Locomotive Air Compressor Filter
Rugged high-efficiency all metal filters designed to clean compressor intake air on locomotives, utilizes disposable resin impregnated synthetic media elements. Efficiency is 98-99% with excellent dirt holding capacity. |
|
|
